Sketcher ConstrainHorizontal/cs

Horizontal/vertical

Vertical

Sketcher

The Sketcher ConstrainHorizontal tool constrains lines or pairs of points to be horizontal (parallel to the horizontal axis of the sketch).

introduced in version 1.0: In most cases it is advisable to use the combined Sketcher ConstrainHorVer tool instead.

Funkce

Kliknutím na ni vyberte přímku v náčrtu.

Přímka se zbarví na tmavězelenou.

Vazbu Horizontálně aplikujete kliknutím na její ikonu v panelu nástrojů Náčrtu nebo výběrem položky Vazba horizontálně v submenu Vazby v menu Náčrtu v Pracovní ploše Náčrt (nebo v menu Nákres Díl v pracovní ploše Díl). Vybraná přímka je upravena tak, aby byla paralelní s horizontální osou náčrtu.

Může být vybráno i více přímek

a potom vybrána Vazba horizontálně jak je popsáno výše, horizontálně jsou pak upraveny všechny přímky.

See also: Drawing aids.

Continue mode

1. Make sure there is no selection.
2. There are several ways to invoke the tool:
   • introduced in version 1.0: If the Auto tool for Horizontal/Vertical preference is selected (default): press the down arrow to the right of the button and select the Constrain horizontal option from the dropdown.
   • If this preference is not selected (and in version 0.21 and below): press the Constrain horizontal button.
   • Select the Sketch → Sketcher constraints → Constrain horizontal option from the menu.
   • Use the keyboard shortcut: H.
3. The cursor changes to a cross with the tool icon.
4. Do one of the following:
   • Select two points.
   • Select a single line.
5. A constraint is added.
6. Optionally keep creating constraints.
7. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Run-once mode

1. Do one of the following:
   • Select two or more points.
   • Select one or more lines. Points can be included in the selection, but will be ignored.
2. Invoke the tool as explained above, or with the following additional option:
   • introduced in version 1.0: Right-click in the 3D view and select the Constrain horizontal option from the context menu.
3. Depending on the selection one or more constraints are added.

Scripting

Sketch.addConstraint(Sketcher.Constraint('Horizontal', Line))

The Sketcher scripting page explains the values which can be used for Line and contains further examples on how to create constraints from Python scripts.

Horizontal/vertical

Vertical

Sketcher

Sketcher

• General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation

---

• Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry

---

• Sketcher constraints:
  • Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
  • Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
  • Other constraints: Refraction (Snell's law)
  • Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint

---

• Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints

---

• Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves

---

• Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space

---

• Additional: Sketcher Dialog, Preferences, Sketcher scripting

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub